SNABBORDER
 SÅ LÄGGER DU DIN SNABBORDER
  1. Skriv in artikelnumret på den artikel du vill beställa
  2. Välj rätt artikel i listan som visas när du börjat ange numret, tryck "tab" på tangentbordet
  3. Ange antalet du vill beställa av artikeln,  tryck "tab" på tangentbordet
  4. Tomma rader kommer automatiskt fyllas på under när ni lagt till en produkt.
  5. Tryck lägg i varukorgen eller Enter på tangentbordet för att flytta över din inöpslista
OBS! Om du snabbt tabbar efter angivit artikelnummret kan du få fel artikel!
Artikelnr Antal Lager Pris/st Namn Totalt
MATCHA MODELL
Highlighta produkter till:
Start  Senaste Produkter  FUEL LEVEL SENDER, 0-90 OHM
FUEL LEVEL SENDER, 0-90 OHMFUEL LEVEL SENDER, 0-90 OHM
  • FUEL LEVEL SENDER, 0-90 OHM
  • FUEL LEVEL SENDER, 0-90 OHM
Artnr: RA-20-0247-
 

FUEL LEVEL SENDER, 0-90 OHM

 
Bränslenivågivare passande RADIUM FCST eller Unversal applikationer Läs mer
 
Har du frågor om produkten? Kontakta kundtjänst
 
 
Med unika och nyskapande produkter så har Radium Engineering tagit marknaden med storm. Som Skandinavisk distributör lagerhåller MotoSpeed ett växande utbud för omgående leverans, Återförsäljare är välkomna att kontakta oss på info@motospeed.com
Om du inte hittar det du söker från denna leverantör så kan du skicka en Pris och tillgänglighetsförfrågan HÄR
Varianter:
PRODUKTBESKRIVNING

OBS 2 versioner existerar. 

Det första gäller den äldre modellen. 

 

Version 1 Older type: 

 

Click here to download installation instructions (PDF)

Float-style fuel level sending units with standard SAE 5-bolt mounting pattern. Easy to install using the supplied hardware and Deutsch connectors (gauge not included). Fits most fuel cells including Radium, ATL, Fuel Safe, Pyrotect, Harmon, Jaz, etc. and extensively used with the Radium Fuel Cell Surge Tank. Unlike most other senders, this rugged design features a FR4 conformal-coated PCB, epoxy potted electrical terminals, and an anodized surface finish making it suitable for use with gasoline, diesel, and specifically alcohol based fuels including methanol, ethanol, E85, etc.
Made here in Portland, USA.

NOTES:
-All level senders are 0 ohms empty to 90 ohms full. This 0-90 ohm range is common with many OEM gauges.
-Radium does not sell fuel level gauges, but a popular option is this Autometer Fuel Level Gauge
-To test the sender, measure the resistance between the two wires while tipping the sender to allow the float to move.
-Fuel level senders carry a 1 year warranty through Radium Engineering
-If purchased with a Radium Fuel Cell Surge Tank (FCST), the sender will come pre-installed.
-Not compatible with MS109E fuel.

ALWAYS MEASURE THE INSIDE DEPTH OF THE FUEL CELL BEFORE SELECTING SENDER LENGTH.

If using the Radium Spare Tire Fuel Cell, select the 8" long sender.

Electrical:
12VDC with unit connected to a single electric receiver gauge that utilizes an AC resistance curve (shown below).


Mounting:
When mounted properly, the gasket seal will withstand an internal tank pressure of over 6psi conforming to SAE J1810.
 
Includes:
-Level Sensing Probe
-SAE 5-Bolt Gasket
-Stainless Bolts 10-32 (x5)
-Nylon Sealing Washers (x5)
-Deutsch DT 2P Connector
-Deutsch DT Sockets (x2)



Version 2 New type:

 

Click here to download installation instructions (PDF)

This fuel level sensor uses the standard SAE 5-bolt mounting pattern, extensively used with the Radium Fuel Cell Surge Tank.

Full stainless steel sealed construction with magnetic float.
Resistance: 0 ohm empty, 90 ohm full

Suitable for use with gasoline, diesel, water, and all alcohol based fuels including methanol, ethanol, E85, etc.

The fuel level sender is easy to install using the supplied hardware and Deutsch connectors (gauge not included).
NOTES:
-All level senders are 0 ohms empty to 90 ohms full (common with many OEM gauges.)
-Radium does not sell fuel level gauges, but a popular option is this Autometer Fuel Level Gauge
-To test the sender, measure the resistance between the two wires while tipping the sender to allow the float to move.
-If purchased with a Radium Fuel Cell Surge Tank (FCST), the sender will come pre-installed.

Each level sender includes the following:
-Level Sensing Probe
-SAE 5-Bolt Gasket
-Stainless Bolts 10-32 (x5)
-Deutsch DT 2P Connector
-Deutsch DT Sockets (x2)

SPECIFICATIONS:
PROBE MATERIAL: 304 Stainless Steel
FLOAT MATERIAL: Plastic Buna-N
MOUNTING FLANGE: 5-Bolt SAE
MOUNTING GASKET: FKM Viton
RESISTANCE: 0 (Empty)-90 (Full) Ohms
PVC WIRES: 18" (460mm) with PA Cover
CONNECTORS: Deutsch DT, 2P
OPERATING TEMP: -40F to +185F 
 
 
 
Reservdelar
Mer från samma Varumärke
Alla Relaterade produkter